Electronic Engine Control Systems
for all type of boats with inboard, inboard/outboard or outboard engines.
Easily upgrade the traditional boat mechanical controls.
Gives finger tip, precise control of your engines shift and throttle functions. Supplied in complete kits with all components required and ready to install.
Latest CANbus technology for easy installation and set up.
12V Standard power (24V. on demand).
= Can be connected up to 6 control heads.
= Auto synchronization r.p.m.
= Possibility of throttle in «BUMP» mode.
= Can incorporate Handheld Remote Controls.
= Memory of diagostics checks of warning and alarms.

COMPLETE KIT 1 inboard engine / 1 station
Comprising:
1 - Actuator SA2
1 - Single Control Head - 2-buttons
1 - Station comm. cable 40ft.
2 - Terminating resistor
1 - Harness DC power-actuator 30ft.
1 - Harness Start Interlock 30ft
1 - Harness Ignition enable jumper
1 - Harness Ignition 40ft.
Ref: GLE1M1EI
Price: £1950.00 + vat

COMPLETE KIT 2 inboard engines / 1 station
Comprising:
2 - Actuator SA2
1 - Twin Control Head - 2-buttons
1 - Station comm. cable 40ft.
1 - Station comm. cable 20ft.
2 - Terminating resistor
2 - Harness DC power-actuator 30ft.
2 - Harness Start Interlock 30ft
1 - Harness Ignition enable jumper
1 - Harness Act. enable tach sender.
1 - Harness Ignition 40ft.
Ref: GLE2M1EI
Price: £2,999.00 + vat

KIT 2nd STATION 2 inboard engines
Comprising:
1 - Twin Control Head - 2-buttons
1 - Station comm. cable 40ft.
Ref: GLE2M2EI
Price: £760.76 + vat

COMPLETE KIT 1 engine I/O - outboard, 1 station + trim
Comprising:
1 - Actuator SA2
1 - Single Control Head - 6-buttons
1 - Station comm. cable 40ft.
2 - Terminating resistor
1 - Harness DC power-actuator 30ft.
1 - Harness Trim/Ignition/Start Interlock.
Ref. GLE1M1EC
Price: £1,999.00 + vat

COMPLETE KIT 2 engines I/O -outboard, 1 station + trim
Comprising:
2 - Actuator SA2
1 - Twin Control Head - 6-buttons
1 - Station comm. cable 40ft.
1 - Station comm. cable 20ft.
2 - Terminating resistor
2 - Harness DC power-actuator 30ft.
1 - Harness Ignition/Tach sender port
1 - Harness Tach sender starboard.
2 - Harness Trim / Start Interlock.
Ref: GLE2M1EC
Price: £2,999.00 + vat

KIT 2nd STATION 2 eng. I/O - outboard 2 stations + trim
Comprising:
1 - Single Control Head - 6-buttons
1 - Station comm. cable 40ft.
Ref. GLE2M2EC
Price: £787.42 + vat

DUAL STATION EXCHANGER GEAR UNIT
Recommended for dual function levers in all stern drive, outboard and inboard engines. The system uses a selector that locks the other station and avoid any accidental action from the excluded station. Uses one unit per engine.
Ref: MOR207572
Throttle
Price: £160.00 + vat

Ref: MOR207573
Clutch
Price: £155.00 + vat

Ref: MOR204993
Selector for clutch
Price: £149.50 + vat

Dual Station Transfer Unit
Uses cables type 33-C. Connects the cables of two stations to one engine. 1 unit for throttle, 1 unit for clutch.
Ref: GS40010
Price: £79.00 + vat

Universal Control Manufactured in Hostafon with levers in light alloy aluminum. Can be installed
in both sides. With adaptors for Morse 33C, OMC, Mercury,
Mariner and Suzuki.
114 x 228 mm.
White
Ref: GS40001
Price: £65.00 + vat

Side Control
Dual function, single lever control, For virtually all stern drive, outboard and inboard engines. Push button for neutral engine warm-up.
For 33-C cables.
Standard
Ref: GS40015
Price: £160.00 + vat

Side Control
Dual function, single lever control. Push button for neutral engine warm-up.
Neutral interlock prevents starting in gear.
For cable 33-C.
Standard
Ref: MOR306950
Price: £175.00 + vat

TC Control
Chrome plated heavy duty single function control for clutch and throttle.
With twisting brake on throttle handle.
Uses 3300C cables.
Ref: PRE36468
Price: £85.00 + vat

TM Control
Single function control for clutch and throttle.
Polished stainless steel cover and plates. Neutral safety switch included.
Uses 3300C cables.
Ref: PRE30020
Price: £115.00 + vat

Throttle Friction Kit
for «TM» controls.
Ref: PRE30066
Price: £11.28 + vat

TS Controls
Chrome plated control for dual function by lever (clutch and throttle). Handle pulls out to operate neutral throttle
Neutral safety switch to ensure engine only starts when in neutral.
Uses 3300C cables.
Ref: PRE308601
1 Handle = 1 Engine
Price: £147.80 + vat

Ref: PRE308602
2 Handles = 2 Engines
Price: £145.00 + vat

«SL3»
Dual function, single lever control, for virtually all stern drive, outboard and inboard engines.Push button for neutral engine warm-up. Neutral interlock
prevents starting in gear. For cable 33-C, OMC or Mercury.

SL3 Control

Ref: MOR309476
Standard
Price: £155.00 + vat

Ref: MOR309478-002
With T-T switch
Price: £197.00 + vat

SORRY OUT OF STOCK!

SL3 Control

Ref: MOR309479
Standard
Price: £245.00 + vat

Ref: MOR309481
With T-T switch
Price: £325.00 + vat

Sorry Out of Stock

Engine Control Cables
For applications in Mercury, Mercruiser and Mariner.

Engine Control Cables
For applications in Mercury GEN II Platinum 4000/4500

Mercury Gen ll 4000/4500	Length	Price
PRE53006	6’ = 1,80m	£20.00 + vat
PRE53007	7’ = 2,10m	£20.80 + vat
PRE53008	8’ = 2,45m	£21.50 + vat
PRE53009	9’ = 2,75m	£22.50 + vat
PRE53010	10’ = 3,05m	£23.50 + vat
PRE53011	11’ = 3,35m	£23.90 + vat
PRE53012	12’ = 3,65m	£24.50 + vat
PRE53013	13’ = 3,95m	£25.00 + vat
PRE53014	14’ = 4,25m	£26.00 + vat
PRE53015	15’ = 4,60m	£26.60 + vat
PRE53016	16’ = 4,90m	£27.50 + vat
PRE53017	17’ = 5,20m	£28.20 + vat
PRE53018	18’ = 5,50m	£28.90 + vat
PRE53019	19’ = 5,80m	£29.30 + vat
PRE53020	20’ = 6,10m	£30.50 + vat
PRE53021	21’ = 6,40m	£31.60 + vat
PRE53022	22’ = 6,70m	£32.50 + vat
PRE53023	23’ = 7,00m	£33.60 + vat
PRE53024	24’ = 7,30m	£32.24 + vat

Engine Control Cables
For applications in OMC, Johnson, Evinrude 1979 to date.

Engine Control Cables
Travel 3", Threaded 10-32.

Reference	Length	Price
PRE3300C05	5' = 1,50M	£13.72 + vat
PRE3300C06	6’ = 1,80m	£14.15 + vat
PRE3300C07	7’ = 2,10m	£14.62 + vat
PRE3300C08	8’ = 2,45m	£15.08 + vat
PRE3300C09	9’ = 2,75m	£15.54 + vat
PRE3300C10	10’ = 3,05m	£15.99 + vat
PRE3300C11	11’ = 3,35m	£16.44 + vat
PRE3300C12	12’ = 3,65m	£16.91 + vat
PRE3300C13	13’ = 3,95m	£17.36 + vat
PRE3300C14	14’ = 4,25m	£17.80 + vat
PRE3300C15	15’ = 4,60m	£18.27 + vat
PRE3300C16	16’ = 4,90m	£18.72 + vat
PRE3300C17	17’ = 5,20m	£19.19 + vat
PRE3300C18	18’ = 5,50m	£19.64 + vat
PRE3300C19	19’ = 5,80m	£20.08 + vat
PRE3300C20	20’ = 6,10m	£20.56 + vat
PRE3300C21	21’ = 6,40m	£21.25 + vat
PRE3300C22	22’ = 6,70m	£21.92 + vat
PRE3300C23	23’ = 7,00m	£22.62 + vat
PRE3300C24	24’ = 7,30m	£23.29 + vat
PRE3300C25	25' = 7,60m	£23.98 + vat
PRE3300C26	26' = 7,90m	£24.65 + vat
PRE3300C27	27' = 8,25m	£25.35 + vat
PRE3300C28	28' = 8,55m	£26.02 + vat
PRE3300C29	29' = 8,85m	£26.72 + vat
PRE3300C30	30' = 9,15m	£27.39 + vat
PRE3300C31	31' = 9,50m	£28.80 + vat
PRE3300C32	32' = 9,75m	£29.80 + vat
PRE3300C33	33' = 10,00m	£30.80 + vat
PRE3300C34	34' = 10,35m	£31.80 + vat
PRE3300C35	35' = 10,65m	£32.81 + vat
PRE3300C36	36' = 11,00m	£33.80 + vat
PRE3300C38	38' = 11,50m	£35.87 + vat
PRE3300C40	40' = 12,10m	£37.80 + vat
PRE3300C42	42' = 12,70m	£41.41 + vat
PRE3300C44	44' = 13,30m	£43.69 + vat
PRE3300C46	46' = 14,00m	£45.98 + vat
PRE3300C48	48' = 14,50m	£45.98 + vat
PRE3300C50	50' = 15,00m	£48.50 + vat

Utility Cables

Vernier Control Head and Cable

SD Control
Handle for throttle, choke, stop, etc. Uses 3300C cables.

Ref: PRE31916 - SD Control
Price: £27.00 + vat

Ref: PRE31917 - Mounting bracket
Price: £14.34 + vat

Vernier Head Only

Ref: PRE377941
Price: £33.00 + vat

Cable Kit Adapters 3300C
Mercury / Mercruiser
Ref: PRE30107
Price: £22.01 + vat

Cable Kit Adapters 3300C
OMC
Ref: PRE30493
Price: £20.97 + vat

Cable Kit Adapters 3300C
Johnson, Evinrude
Ref: PRE30172
Price: £10.50 + vat

Cable Kit Adapters 3300C
OMC
Ref: PRE30055
Price: £4.90 + vat

Cable Kit Adapters 3300C
For Mercury
Ref: PRE30190
Price: £9.00 + vat

Cable Kit Adapters 3300C
For Mercruiser
Ref: PRE30212
Price: £8.00 + vat

#1 #2 #3

#4 #5 #6

#7

Accessories for Cables
Ref: PRE331125 - Fork #1
Price: £8.50 + vat

Ref: PRE31799 - Ball Joint #2
Price: £8.50 + vat

Ref: PRE308650 - Pivot #3
Price: £5.99 + vat

Ref: PRE332010 - Clamp #4
Price: £2.88 + vat

Ref: PRE331538 - Shim #5
Price: £2.88 + vat

Ref: PRE331980 - Terminal eye #6
Price: £2.98 + vat

Temporarily out of stock!

Ref: PRE336174 - Stop Collar #7
Price: £5.98 + vat

Bracket Kit
for inboard transom steering mount.
Ref: PRE370046
Price: £49.00 + vat

Splashwell Kit
Bracket kit for inboard side splashwell steering mount.
Ref: PRE370613
Price: £34.00 + vat

Link Arm
for outboards steering.
Ref: PRE370621
Price: £25.00 + vat

Link Arm
for outboards steerings, Stainless steel. Adjustable. Quick connection.
330 - 370mm
Ref: GS41082
Price: £39.00 + vat

Link Arm
for outboards steerings. Stainless steel.
For Honda engines.
Ref: HYDBR53
Price: £38.00 + vat

Link Arm
for outboards steerings. Stainless steel.
For engines Johnson/Evinrude.
Ref: GS41080
Price: £34.00 + vat

Swivel Joint
for steering cables.
Ref: PRE370618
Price: £20.64 + vat

Ball Joint
for steering cables.
Ref: PRE370619
Price: £38.00 + vat

Zero Torque Helm
Zero torque steering rotary helm. Eliminates prop feedback load. Precise response of 3.8 turns lock-to-lock. For use with the steering cables 3000 SS.
Directly replaces Rotary Steering Systems for Teleflex-Morse NFB Safe-T, NFB 4.2, T73BRFC.
Ref: PRE500010 - Helm
Price: £62.80 + vat

Ref: PRE500012 - 90º/Bezel Kit 90º
Price: £10.90 + vat

Ref: PRE500014 - 20º/Bezel Kit 20º
Price: £10.50 + vat

Tilt Steering Helm «ZTS»
Tilt rotary steering system to use with the steering cables 3000 SS.
Ref: PRE500007
Price: £130.00 + vat

Rotary Helm

Ref: PRE520010 - Helm
Price: £42.00 + vat

Ref: PRE500012 - 90º/Bezel Kit 90º
Price: £10.90 + vat

Ref: PRE500014 - 20º/Bezel Kit 20º
Price: £10.50 + vat

Tilt Steering Helm 3000
Tilt rotary steering system to use with the steering cables 3000 SS.
Ref: PRE370987
Price: £122.00 + vat

Mega-Ur Steering Cable
Steering cable. Replaces Uflex and Teleflex cables.

Back to top

Steering System <<LT>>
Rotary steering system: Helm, Steering cable and 90o bezel.
Can be used on boats up to 18ft. in length with engines up to 55HP.
2,5 turns lock to lock. Travel 230mm.

S.S. Steering System 3000 SS
Rotary steering system: Helm, Stainless steel cable and 90º Bezel.
Can be used on boats up to 25 ft. in length.
Stainless steel inner cable with spring stainless steel enclosure coil.
Maximun working load: 300 lb. at the tiller arm.
Three turns lock to lock. Travel 230 mm.
Directly replaces Rotary Steering Systems for
Teleflex-Morse® Safe-T QC, Big-T ‘TS’, T71FC

Reference	Length	Price
PRE315008	8' = 2,45m	£111.00 + vat
PRE315009	9' = 2,75m	£112.93 + vat
PRE315010	10' = 3,05m	£114.88 + vat
PRE315011	11' = 3,35m	£116.82 + vat
PRE315012	12' = 3,65m	£118.77 + vat
PRE315013	13' = 3,95m	£120.70 + vat
PRE315014	14' = 4,25m	£122.82 + vat
PRE315015	15' = 4,60m	£124.59 + vat
PRE315016	16' = 4,90m	£126.54 + vat
PRE315017	17' = 5,20m	£128.50 + vat
PRE315018	18' = 5,50m	£130.43 + vat
PRE315019	19' = 5,80m	£132.38 + vat
PRE315020	20' = 6,10m	£134.32 + vat

S.S. Steering Cable
Stainless steel steering cable.

Reference	Length	Price
PRE550008	8' = 2,45m	£55.00 + vat
PRE550009	9' = 2,75m	£58.00 + vat
PRE550010	10' = 3,05m	£59.17 + vat
PRE550011	11' = 3,35m	£60.96 + vat
PRE550012	12' = 3,65m	£62.76 + vat
PRE550013	13' = 3,95m	£64.56 + vat
PRE550014	14' = 4,25m	£66.36 + vat
PRE550015	15' = 4,60m	£68.16 + vat
PRE550016	16' = 4,90m	£68.00 + vat
PRE550017	17' = 5,20m	£69.00 + vat
PRE550018	18' = 5,50m	£73.56 + vat
PRE550019	19' = 5,80m	£75.37 + vat
PRE550020	20' = 6,10m	£77.16 + vat

Steering Wheel «ATLANTIC»
Manufactured in aluminium
and soft polyurethane.

Ref:	Diam. total	Colour	Hub	Price
GS41141	330 mm	White	5/8-3/4" = 17/19 mm	£67.81
GS41136	350 mm	White	5/8-3/4" = 17/19 mm	£67.81
GS41137	350 mm	Black	5/8-3/4" = 17/19 mm	£61.68
GS41138	350 mm	Silver	5/8-3/4" = 17/19 mm	£67.81

Steering Wheel «VORTICE» Manufactured in aluminium
and soft polyurethane.
Ref: GS41139
Diam. 330 mm
White
5/8-3/4" = 17/19 mm
Price: £66.22 + vat

Ref: GS41140
Diam. 350 mm
Black
5/8-3/4" = 17/19 mm
Price: £61.00 + vat

Steering Wheel «BEACH»
Manufactured in aluminium
and soft polyurethane.
Ref: GS41134
Diam. 350 mm
White
5/8-3/4" = 17/19 mm
Price: £80.21 + vat

Ref: GS41135
Diam. 350 mm
Black
5/8-3/4" = 17/19 mm
Price: £75.74 + vat

Steering Wheel
Manufactured in polyurethane colour black..
Diam. 350 mm
Depth. 110 mm
5/8-3/4" = 16/19 mm
Ref: GS41122
Price: £25.00 + vat

Steering Wheel
Manufactured in nylon colour black.
Diam. 350 mm
Depth. 110 mm
5/8-3/4" = 16/19 mm
Ref: GS41123
Price: £19.00 + vat

Steering Wheel «MARPAC»
Manufactured in nylon colour black.
Diam. 330 mm
5/8-3/4" = 17/19 mm
Ref: GS41127
Price: £27.00 + vat

Steering Wheel «MARINA»
Manufactured in aluminium
and soft polyurethane.
Ref: GS41145
Diam. 350 mm
Black
5/8-3/4" = 16/19 mm
Price: £64.03 + vat

Ref: GS41146
Diam. 350 mm
Silver
5/8-3/4" = 16/19 mm
Price: £70.40 + vat

Steering Wheel «OCEANO»
Manufactured in aluminium
and soft polyurethane.
Ref: GS41143
Diam. 330 mm
Black
5/8-3/4" = 16/19 mm
Price: £63.32 + vat

Ref: GS41144
Diam. 330 mm
Grey
5/8-3/4" = 16/19 mm
Price: £68.72 + vat

Steering Wheel «OMEGA»
Spokes in aluminium and wheel
of mahogany.
Ref: GS41142
Diam. 330 mm
5/8-3/4" = 16/19 mm
Price: £195.00 + vat

Ref: GS41131
Diam. 370 mm
5/8-3/4" = 16/19 mm
Price: £195.00 + vat

Steering Wheel «MARLIN»
Spokes in aluminium and wheel of mahogany.
Diam. 350 mm
5/8-3/4" = 17/19 mm
Ref: GS41132
Price: £163.17 + vat

Steering Wheel «COMBI»
Manufactured in aluminium
and soft polyurethane.
Ref: GS41147
Diam. 350 mm
Black
5/8-3/4" = 16/19 mm
Price: £143.20 + vat

Ref: GS41148
Diam. 350 mm
Grey
5/8-3/4" = 16/19 mm
Price: £154.00 + vat

Steering Wheel «ALBATROS»
Spokes in aluminium and wheel soft skay in silver.
Ref: GS41133
Diam. 350 mm
5/8-3/4" = 17/19 mm
Price: £93.66 + vat

Steering Wheel
Manufactured in acacia wood with solid brass tapered hub with cap.
Ref: GS41100
Diam. 400 mm
5/8-3/4" = 16/19 mm
Price: £68.00 + vat

Ref: GS41101
Diam. 500 mm
5/8-3/4" = 16/19 mm
Price: £71.00 + vat

Ref: GS41102
Diam. 600 mm
5/8-3/4" = 16/19 mm
Price: £81.00 + vat

Ref: GS41103
Diam. 700 mm
7/8-1" = 22/25,4 mm
Price: £90.50 + vat

Ref: GS41104
Diam. 800 mm
7/8-1" = 22/25,4 mm
Price: £102.00 + vat

Steering Wheel
Manufactured in stainless steel wheel and hub with plastic cap.
Ref: GS41110
Diam. 400 mm
5/8-3/4" = 16/19 mm
Price: £63.60 + vat

Steering Wheel
Manufactured in stainless steel wheel covered with foam cover.
Ref: GS41115
Diam. 400 mm
5/8-3/4" = 16/19 mm
Price: £63.60 + vat

Steering Wheel
Manufactured in stainless steel with wheel in mahogany wood.
Ref: GS41119
Diam. 350 mm
Depth. 105 mm
5/8-3/4" = 16/19 mm
Price: £97.00 + vat

Control Knob
Manufactured in stainless steel. For most destroyer type wheels.
Ref: GS41190
Diam. 19 - 25 mm
Price:£18.80 + vat

Control Knob
Manufactured in stainless steel. For most destroyer type wheels.
Ref: GS41191
Diam. 19 - 25 mm
Price:£19.90 + vat