Aqualarms
Aqualarm Products have been constructed out of quality materials and are ideal for commerical use, and have also found an ever increasing demand in the leisure boat world. There are lower priced products on the market but we doubt that they are of such high quality as Aqualarms.

Their exhaust alarms are very easy to install and can save you major engine repairs or renewal. They are installed down stream from the point where the raw water is injected into the exhaust.

Single Engine Wet Exhaust Overheat Alarm

1EX Single Engine Wet Exhaust Overheat Alarm
Our 1EX (12 or 24) vdc alarms are designed for single inboard or outboard engine installation, and are unique
with two sensors, one to monitor the water cooled exhaust,and one for the engine block, and are preset to
activate at 90°c +/-5°c.

1EX Temperature Alarm Kit contains:
Single engine control unit
2 temperature sensors
1 Port Loop cable 1.5m
1 Power cable, complete with
fuse and fuse holder, 4.5m
1 Sensor cable 5.5m
Installation and Operating instructions

1EX 12 Volt £50.00 +vat

1EX 24 Volt £50.00 +vat

2EX Twin Engine Wet Exhaust Overheat Alarm
Our 2EX (12 or 24) vdc are designed for twin inboard or outboard engine installations, and are unique with four sensors, two for each engine. An LED will alluminate, to indicate port or starboard overheat problem, and are preset to activate at 90°c +/-5°c.

2EX Temperature Alarm Kit contains:
Twin engine control unit
4 temperature sensors
1 Port Loop cable 1.5m
1 Starboard Loop cable 1.5m
1 Power cable, complete with
fuse and fuse holder, 4.5m
1 Sensor cable, from unit to spur 5.5m 
Port spur 2m Starboard spur 2m  
Installation and Operating instructions

2EX 12 Volt £65.00 +vat

2EX 24 Volt £65.00 +vat