|
Manifold to replace Mercruiser
120hp, 153L, 4 cyl
Includes all plugs, gaskets & mounting hardware as illustrated.
If you require end caps - elbows etc.. please see below
oem: 63122A10, 63122A13
Ref: BARRMC163122
Price: £190.50 + vat
| 
|
Elbow to replace Mercruiser
120hp, 153L, 4cyl
I(ncludes all plugs, gaskets & mounting hardware as illustrated.
oem: 39920A1, 55538A2
Ref: BARRMC2055538
Price: £120.00 + vat
|
|
Water Inlet End Cap Gasket
to replace Mercruiser
120hp, 153L, 4 Cyl
oem: 27-39917
Ref: BARRMC47-27-39917
Price: £4.99 + vat
| 
|
Water Inlet End Cap
to replace Mercruiser
120hp, 153L, 4 cyl
oem: 47638A1
Ref: BARR1-47638
Price: £25.00 + vat
|
|
Blank Rear End Plate/Cap
for Mercruiser
120hp, 153L, 4cyl
Oem: 73811A1
Ref: BARR1-73811
Price: £16.00 + vat
| 
|
Gasket for Blank End Plate
for Mercruiser
120hp, 153L, 4cyl
oem: 27-39923
Ref: GLM31420
Price: £5.50 + vat
|
|
Elbow Gasket kit for Mercruiser
120hp, 153L
fits with the above elbow/riser (BARRMC2055538) includes bolts as illustrated.
oem: 27-39915
Ref: BARRMC2055538P
Price: £6.60 + vat
| 
|
Exhaust Manifold Gasket Set for Mercruiser
120hp, 153L
set as illustrated.
Ref: BARRMC472735898A4
Price: £25.00 + vat
|
|
Exhaust Manifold fits Mercruiser 3.0L
This manifold offered comes complete with gaskets and end caps, for models 3.0LX/3.0L 140hp GM181 CID 4-Cylinder (1990 & after), same application as BARRMC1860235
Ref: GLM51214
(OEM: 806867A12)
Price: £199.00 +vat
Temporarily out of stock!
| 
|
Barr Marine Manifold to replace Mercruiser
3.0L/3.0LX 1990 and up
(inc. Vortec style head)
using a Mercarb Carburetors with bolt footprint of 94 x 52mm
fits same application as
(GLM51214)
comes with all hardware kit and gaskets as illustrated. If you require Elbow etc.. see below
Ref: BARRMC1860235
Price: £229.00 + vat
|
|
Exhaust Manifold Assembly
For Mercruiser models: 120/140 GM 153/181 CID 4 Cyl (1982-1995) same application as BARRMC-1-99798
Ref: GLM 51210
(OEM: 806867A8)
Price: £175.00 + vat
Temporarily out of stock!
| 
|
Exhaust Manifold to replace Mercruisers early type
120/140hp, 2.5L/3.0L 4cyl, fitted with a marcarb carburetor with a bolt footprint of 94 x 52mm.
Comes with hardware kit and gaskets as illustrated.
NOT fitted with choke stove, same application as GLM51210.
If you require end caps - elbows etc.. see below.
Oem: 806867A8
Ref: BARRMC-1-99798
Price: £160.00 + vat
|
|
|
|
Manifold to replace Mercruiser
fits 120/140hp, 4cyl
from 1968-82 fitted with a
Rochester carburetor having a bolt footprint of 83 x 48mm.
Comes with hardware kit and gaskets as illustrated, NOT fitted with choke stove.
If you require end caps - elbow please see below.
oem: 95862A5
Ref: BARRMC195862
Price: £186.00 + vat
|
|
Exhaust Manifold fits Mercruiser. For Model 140
GM181 CID 4-Cyl (1968-1982)
same application as
BARRMC-1-96705
Ref: GLM51212
(OEM: 96705A1)
Price: £190.00 +vat
Temporarily out of stock!
| 
|
Barr Manifold to replace Mercruiser
From 1968-82 fitted with a choke stove, this has a Rochester carburetor with a bolt footprint
83 x 48mm.
Comes with hardware kit and gaskets as illustrated, if you require end caps - elbows etc.. see below.
Same application as GLM51212
Oem: 96705A1
Ref: BARRMC-1-96705
Price: £
Temporarily out of stock!
|
|
Exhaust Elbow
For Mercruiser Model 120/140
GM 153/181 CID 4-Cyl. (1982-1995)
For Mercruiser Model 3.0LX/3.0L
GM 181 CID 4-Cyl (1990 & After)
Same application as BARRMC2012076
Ref: GLM 51160
(OEM 12076A2)
WAS £110.00 +vat
NOW £100.00 +vat
| 
|
Barr Marine Elbow to replace Mercruiser
fits 120/140h/ 2.5/3.0L/LX
from 1982 to present in this style, has same application as (GLM51160)
includes all plugs, gaskets & mounting hardware.
oem: 12076A2 and more..
Ref: BARRMC2012076
Price: £120.00 + vat
|
|
Exhaust Elbow 3'' 90°
for Mercruiser Models
For Mercruiser Models:
140, GM 181 CID 4-Cyl (1968-82)
244 CID 4-Cyl (1976-1982)
165/200, GM 250/292 CID L6-Cyl (1969-1981)
215-888, Ford 302/351 CID V8 (1977 & Before)
198-898, GM 305/350 CID V8 (S.B.) (1977-1982)
same application as
BARR-20-76351
Oem: 76351A2 and more..
Ref: GLM 51120
WAS £110.00 +vat
NOW £100.00 +vat
| 
|
Barr Exhaust Elbow 3" for Mercrusier
140, GM 181 CID 4-Cyl (1968-82)
244 CID 4-Cyl (1976-1982)
165/200, GM 250/292 CID L6-Cyl (1969-1981)
215-888, Ford 302/351 CID V8 (1977 & Before)
198-898, GM 305/350 CID V8 (S.B.) (1977-1982)
same application as
GLM51120
Oem: 76351A2 and more..
Ref: BARRMC-20-76351
Price: £110.00 + vat
Temporarily out of stock!
|
|
Elbow to Replace Mercruiser
early 120, 3.0 GM
Oem.: 76325A2 and more...
this has same application as BARRMC-20-76325
Ref: GLM51130
Price: £110.00 + vat
|
|
Barr Elbow to Replace Mercruiser
Early 120, 2.5, 3.0L
GM engines
Oem.: 76325A2
this has same application as GLM51130
Ref: BARRMC-20-76325
Price: £
Temporarily out of stock!
|
|
|
Image coming soon! |
Mercruiser 3" Riser Kit
this kit when installed between the manifold and elbow will raise the elbow by 3" to suit 2.5, 3.0L, 4 inline GM engines
Ref: BARRMC-20-61851A3
Price: £
Temporarily out of stock!
|
|
Mercruiser Manifold Water Inlet End Cap for 3.0L
Ref: GLM51010
Price: £28.00 + vat
|
|
Mercruiser Manifold Blank End Cap for 3.0L
Ref: GLM51030
Price: £16.00 + vat
|
|
Mercruiser Elbow Gasket Kit for 3.0L
Ref: GLM53100
Price: £8.20 + vat
| 
|
Gasket for Water Inlet Cap for Mercruiser 3.0L
Ref: GLM31490
Price: £3.50 + vat
|
|
Gasket for Blank End Cap Mercruiser 3.0L
Ref: GLM30920
Price: £2.90 + vat
| 
|
Mercruiser 3.0L Manifold Drain Plug Kit
Ref: GLM13980
Price: £6.90 + vat
|
|
Mercruiser Manifold to Head Gasket
for 3.0L GM motors
Ref: GLM31570
Price: £10.50 + vat
| 
|
Mercruiser Carburetor Base Gasket
For Mercarb with base bolt footprint 94x52mm
Ref: GLM32180
Price: £5.50 + vat
|
|
Mercruiser Carburetor Base Gasket
for a Rochester Carb with base bolt footprint 83x48mm
Ref: GLM31660
Price: £4.50 + vat
| 
|
Mercruiser Manifold Water Inlet Fitting 3/4" Brass
Ref: GLM13984
Price: £9.50 + vat
|
|
Mercruiser 3.0L Elbow Bolt Kit
to fit GLM51160
Ref: SIE18-8551
Price: £8.55
| |
|
|
Elbow to Replace Mercruiser
models 3.7L / 3.7LX/ 470 and more..
This is a cast iron elbow for aluminum manifold with bolt pattern 80 x 89mm
Ref: GLM51180
Price: £149.00 + vat
Temporarily out of stock!
| 
|
Barr Elbow to Replace Mercruiser
models 3.7L/3.7LX/470 and more..
This is a cast iron elbow to fit cast iron manifold with a bolt pattern approx 92 x 117mm
Ref: BAMC-20-90880
Price: £145.00 + vat
|
|
Mercruiser 470 Elbow Gasket
for aluminum manifold with bolt pattern 80 x 89mm
Ref: GLM32470
Price: £10.00 + vat
| 
|
Mercrusier 470 Elbow Gasket
for cast iron manifold with bolt pattern 92 x 117mm
Ref: GLM32370
Price: £6.50 + vat
|
|
Mercruiser 470 Manifold
Aluminum and Cast iron manifolds for the above elbows, may be available on special order, it may be prudent to allow a provisional sum of
£800 - £950 + vat for these products
Oem.: 816219A4 - 816219A5
Ref: 816219A4
Price: Please call for price 01202 748180
|
|
|
|
Manifold for Mercruiser
model straight 6cyl 140, 150, 160, 165, 200, 250, 292 and more...
Oem.: 58759A14
Ref: GLM51224
Please note this is a special order product and is not stocked, please call for availability 01202 748180 |
|
Barr Manifold for Mercruiser
model straight 6cyl 140, 150, 160, 165, 200, 250, 292 and more...
Oem.: 58759A14
Ref: BARRMC-1-58759
Please note this is a special order product and is not stocked, please call for availability 01202 748180
|
|
Exhaust Manifold Replaces Mercruiser GM V6 4.3
This manifold comes with hardware kit and gaskets as illustrated. For models: 175-205, GM 229/262 CID V6 4.3.
Please note this will not replace the Dry Joint System as fitted from approx 2002, if in doubt see style of elbow gaskets in this listing or either call your engine number.
Ref: GLM51220
(OEM: 9976A17)
WAS £135.00 +vat
NOW £125.00 +vat
|
|
Barr Exhaust Manifold Replaces Mercruiser GM V6
This manifold offered comes complete with gaskets, hose fitting w/drain plug and 4x studs, as illustrated. For models: 175-205, GM 229/262 CID V6.
Please note this will not replace the Dry Joint System as fitted from approx 2002, if in doubt see style of elbow gaskets in this listing or either call your engine number.
Ref: BARRMC-1-99746
Price: £
Temporarily out of stock!
|
|
Exhaust Manifold Replaces Mercruiser GM Small Block
V8, manufactured by HGE, 5.0L & 5.7L with centre riser,
This manifold comes with hardware and gasket as illustrated. For models: 200-320, GM 305/350/377 CID V8.
Please note this will not replace the Dry Joint System as fitted from approx 2002, if in doubt see style of elbow gaskets in this listing or either call your engine number.
Ref: GLM51230
(OEM: 860246A10)
Price: £120.00 + vat
|
|
Barr Exhaust Manifold Replaces Mercruiser GM Small Block V8, 5.0L & 5.7L with centre riser,
This manifold comes with hardware and gasket as illustrated. For models: 200-320, GM 305/350/377 CID V8.
Please note this will not replace the Dry Joint System as fitted from approx 2002, if in doubt see style of elbow gaskets in this listing or either call your engine number.
Ref: BARRMC-1-87114
(OEM: 860246A10)
Price: £
Temporarily out of stock!
|
|
Manifold to Replace Mercruiser
for V8 Big Block 330-340-370, 454, 502, 7.4L and 8.2L & more from 1981 - present
Oem.: 807078A6
comes with hardware and gaskets as illustrated.
Ref: GLM51240
Price: £145.00 + vat
| 
|
Barr Manifold to Replace Mercruiser
for V8 Big Block 330-340-370, 454, 502, 7.4L and 8.2L & more from 1981 - present
Oem.: 807078A6
comes with hardware and gaskets as illustrated.
Ref: BARRMC-1-89011
Price: £
Temporarily out of stock!
|
|
Original Dry Joint Manifold
for GM V6, Dry Joints were normally fitted from 2002 - 2003 and up, if in doubt please see the elbow gasket pattern in this listing, comes with gasket as illustrated.
Oem: 864612T01, 864308T01, 865049T01
Ref: 864612T01
Price: £225.00 + vat
|
|
Original Dry Joint Manifold
for GM V8, 5.0L, 5.7L Dry Joints were normally fitted from 2002 - 2003 and up, if in doubt please see the elbow gasket pattern in this listing, comes with gasket as illustrated.
Oem: 865735A02
Ref: 865735A02
Price: £242.00 + vat
|
|
Exhaust Log Style Manifold Replaces Mercruiser
for GM 198-898, GM 305/350 and more.. V8 (Small Block) approx 1977-1982 comes with gaskets and hardware as illustrated, To fit PORT SIDE ONLY.
If you require end caps - elbow & gaskets see below.
Ref: 7234
(OEM: 77234A7)
WAS £181.00 +vat
NOW £175.00 +vat
| 
|
Exhaust Log Style Manifold Replaces Mercruiser
for GM 198-898, GM 305/350 and more.. V8 (Small Block) approx 1977-1982 comes with gaskets and hardware as illustrated, To fit STARBOARD SIDE ONLY.
If you require end caps - elbow & gaskets see below.
Ref: 7235
(OEM: 77234A8)
WAS £181.00 +vat
NOW £175.00 +vat
|
|
V6 Mercruiser Manifold Conversion Kit
To replace the now discontinued one piece manifold, this has the same application as BARR-V6-kit
Ref: GLM58992
Price: £622.24 + Vat
|
|
Barr V6 Mercruiser Manifold Conversion Kit
To replace the now discontinued one piece manifold, this has the same application as GLM58992
Ref: BARR-V6-KIT
Price: £
Temporarily out of stock!
|
|
Exhaust Elbow 4" Replaces Mercruiser
Fitted to a centre riser manifold on V6 - V8 inc. Big Block from approx 1981 - 2003 will not fit Dry Joint System, If in doubt please see the pattern on the dry joint elbow gasket or call with your engine number.
Comes with gaskets and hardware kit as illustrated.
Ref: GLM51140
(OEM 807988A2)
WAS £110.00 +vat
NOW £95.00 +vat
| 
|
Barr Exhaust Elbow 4" Replaces Mercruiser
Fitted to a centre riser manifold on V6 - V8 inc. Big Block from approx 1981 - 2003 will not fit Dry Joint System, If in doubt please see the pattern on the dry joint elbow gasket or call with your engine number.
Comes with gaskets and hardware kit as illustrated.
Ref: BARRMC-20-44354
(OEM: 44354A3)
Price:
Temporarily out of stock!
|
|
Exhaust Elbow 3'' Replaces Mercruiser
Fitted to a centre riser manifold on V6-V8 inc. Big Block from approx 1981 - present
Ref: GLM51110
(OEM 98504A3)
WAS
£95.00 +vat
NOW £85.00 +vat
| 
|
Barr Exhaust Elbow 3'' Replaces Mercruiser
Fitted to a centre riser manifold on V6-V8 inc. Big Block from approx 1981 - present
Ref: BARRMC-20-98504
(OEM 98504A3)
Price: £
Temporarily out of stock!
|
|
Dry Joint Elbow for V6 - V8
Please note that this is a dry joint elbow usually fitted to most v6 - v8 after 2002.
see images.
Total Height is approx 17cms
Oem: 864309T01
Ref: 864309T1
Price: £228.00 + vat
| 
|
Dry Joint Elbow for V6-V8
Please note that this is a dry joint elbow fitted to most V6-V8 after 2002 if in doubt please see the images this has a total height of 21cm.
Oem: 864591T02
Ref: RM864591T02
Price: £235.00 + vat
|
|
Mercruiser 3" Riser/spacer Kit
This kit when installed between the elbow and manifold will raise the elbow 3" approx 75mm, fits all V6-V8 centre riser manifolds comes with hardware kit and gaskets as illustrated.
Oem.: 93320A3, 93320A5
Ref: GLM50310
Price: £145.00 +vat
| 
|
Barr Mercruiser 3" Riser/spacer Kit
This kit when installed between the elbow and manifold will raise the elbow 3" approx 75mm, fits all V6-V8 centre riser manifolds comes with hardware kit and gaskets as illustrated.
Oem.: 93320A3, 93320A5
Ref: BARRMC-20-93320A3
Price: £155.00 +vat
|
|
Mercruiser 6" Riser Kit
This kit when installed between the elbow and manifold will raise the elbow 6" approx 150mm, fits all V6-V8 centre riser manifolds comes with hardware kit and gaskets as illustrated.
Oem.: 93322A
Ref: GLM50610
Price: £179.00 + vat
| 
|
Mercruiser 6" Riser Kit
This kit when installed between the elbow and manifold will raise the elbow 6" approx 150mm, fits all V6-V8 centre riser manifolds comes with hardware kit and gaskets as illustrated.
Oem.: 93322A
Ref: BARRMC-20-93322A3
Price: £
Temporarily out of stock!
|
|
Riser Elbow Gasket for Dry Joint
This is restricted flow, see image.
Oem: 27-864850A02
Ref: 27-864850A02
Price: £38.00 + vat
| 
|
Riser Elbow Gasket for
Dry joint
This is full flow, see image.
Oem: 27-864547A02
Ref: RM27-864547A02
Price: £38.00 + vat
|
|
Nylon/Plastic Elbow
with drain tap for Mercruiser Manifolds
Ref: GLM13990
Price: £6.90 + vat
|
|
Mercruiser 3.0L Manifold Drain Plug Kit
Ref: GLM13980
Price: £6.90 + vat
|
|
Mercruiser Manifold Gasket Kit
GM V6
Ref: GLM32175
Price: £7.90 + vat
|
|
Mercrusier Manifold Gasket Kit
GM 5.0 - 5.7L
Ref: GLM31105
Price: £12.50 + vat
|
|
Mercruiser Manifold Gasket Kit
Big Block 7.4, to suit manifold GLM51240
Ref: GLM33675
Price: £15.00 + vat
| 
|
Mercruiser Elbow Gasket Kit
to suit all V6, V8 centre riser manifolds, Please note not suitable for Dry Joint.
Ref: GLM53400
Price: £13.90 + vat
|
|
Exhaust Elbow to fit Mercruiser
316 Stainless Steel
Models ; 530DT, 636, D183, D2.8L, D219,
D254, D3.0L, D3.6L, D4.2L
oem, 805602A2
Ref: SED3093300
Price: £474.00 +vat
|
|
Exhaust Elbow to fit Mercruiser Diesel
316 Stainless Steel
Models : D183, D219, 530DTA, 636DTA,
oem, 805602A1
Ref: SED3092000
Price: £298.00 +vat
|
|
Exhaust Elbow
Fits 165, 2.8, 4.2, and more...
All with oem: 805265A1
Ref: 265A1
Price: £850.00 + vat
| 
|
Exhaust Down Pipe
Fits 165, 2.8, 4.2, and more...
All with oem: 805013T1
Ref: 013T1
Price: £345.00 + vat
|
|
Riser kit for V6
Ref: Quicksilver RM14865A-1
Price: £173.68 +vat
| 
|
Mercruiser Exhaust Tube
for GM V6
Ref: GLM50750
Price: £60.00 + vat
|
** If you cant see what you need call us on 01202 748180
|
